Self Drilling Screws

Product Details:

DESCRIPTION:
                     Welfast Fasteners specializes in Pin Type Anchors for push through applications. Pin Type Anchors are impact-expansion type concrete anchors with an interior hole extending the length of the anchor. A hardened drive pin comes along the assembly inserted in the bolt. The anchor is threaded on the upper portion where the drive pin is inserted. Other end of the anchor has four equally spaced slots for a portion of its length, with ribs extending the circumference of the anchor for a portion of its length. Pin Type Anchors are yellow dichromate plated over zinc.

SUITABLE FOR:
                    - Concrete 

HOW TO INSTALL:
       
1) Drill a hole of sufficient depth using a hammer drill and properly sized carbide bit of the same diameter as the anchor being installed.
2) Clean out hole of all the drilling dust.
3) Place the washer and nut on the anchor, turning nut on to the anchor as required:
           a. Flush with top so as to secure the threads while the anchor is being hammered.
           b. Thread them fully.
4) With nut, washer and pin in place, insert the anchor through the material to be fastened and into the concrete base material.
5) Using a proper sized hammer, set pin with several accurate strikes on the head of the pin until the pin is flush with the top of the anchor. The concrete anchor is now properly set eliminating the need to torque the nut to set the anchor.

FEATURES:
- Drill hole size is equal to actual anchor size, thus no templates required.
-  Quick and simple hammer set installation eliminates need of any special tools and also reduces installation time. 
-  Easy (visually) inspection
-  Yellow Dichromate plating over zinc.

APPLICATIONS:
1) Railings
2) Profiled Steel
3) Machines
4) Gratings
5) Fire Fighting Equipments
6) Lighting Fixtures
7) Conduit Pipes
8) Gates
9) Consoles
10) Steel Constructions

Additional Information:

• Production Capacity: 120000
• Delivery Time: 2 Days
• Packaging Details: As per attached PDF

Product Details:

Product Description

Engineered to consistent performance and speed, Welfast Self Drilling Screws offer quality with precision. These are cold formed with rolled thread for superior strength and fast drilling performance. Strictly adhering to DIN Standards, Welfast Self Drilling Screws are available in a dynamic assembly of diameter ranging from #10 - #12 with length ranging from 20mm – 100mm. Additional options of Coarse Thread and Fine Thread adds value to selection.

 

Features:

• High Performance – Continuous thread design up to drilling point maximizes pullout performance and shear strength.
• Precision – Drilling these screws is achieved in a single process thus eliminating the need of alignment or pre-drilled holes and thus ensuring precision.
• Easy and Smooth Tapping – Its smooth thread allows easy and self tapping through the structure.
• Easy to Use with Minimal Efforts – Design of these screws is so engineered that unskilled amateur can use them with minimal efforts
• Time Saving – Using these screws saves time by eliminating the need of alignment or pre-drilled holes.
• Dual Functionality – Allows fastening to both, timber and steel.
• Minimal Wastage – Reduces Wastage

 

Applications:

 

• Roofing assembly
• Brick Tie systems to metal studs
• Decking to bar joist
• Electrical boxes to metal studs
• Light Gauge steel to structural steel
• Masonry Ties to steel studs
• Metal Building
• Steel Channel to joists
• Steel Frames
• Stitching Deck Side Laps 

Installation guide:

 Insert the 8 or 10 mm (according to required size) hex head adapter into the drill motor. Center the adapter into the drill’s chuck to ensure that adaptor does not wander.

• Put on the safety glasses to protect your eyes.
• Inspect the hex end of the adaptor for cleanliness. If metal shavings are built up inside the tip, insert the drilling end of the screw into the cavity of the hex head while holding the trigger of the drill.

 

Technical specifications:

Additional Information

Additional Information:

• Production Capacity: 500000
• Delivery Time: 2 days
• Packaging Details: Standers cartoon packing's as per given PDF.

Product Details:

Being an eminent company, we are involved in offering best quality of Rawl Bolt. This Rawl Bolt is extensively used in various suitable applications and highly appreciated for its hassle free performance. We are providing these products to customers in different sizes and specifications at most reasonable prices.

 

Specifications:

 

• Material: Yellow Passivated Zinc Plated Steel
• Size: M6 x 50, M8 x 65, M10 x 70, M12 x 90
• Applications: Best suited for use in Concrete

 

Some typical applications include:

 

• Hand Rails
• Ductwork Support
• Pipework Support
• Racks/Shelves
• Holding down machinery
• Structural Steel

Additional Information:

• Production Capacity: 100000
• Delivery Time: 2 days after Purchase order conformation
• Packaging Details: As per attached PDF